Sony MZ-R90 Manual De Instrucciones página 36

z
You can store phrases from a previously labeled
track or disc.
Do the procedure "Relabeling recordings"
(page 35) and display the track or disc name
that contains the phrase that you want to store.
Press VOL +/– repeatedly to move the cursor to
the right of the phrase. Then press X for 2
seconds or more to store the phrase.
Storing phrases using the EDIT
menu
1
Press the jog lever so that "EDIT"
flashes in the display, and then press
the lever again.
2
Flip the jog lever until "Name Bank"
flashes in the display, and then press
the jog lever.
3
Enter the phrase you want to store,
and then press the jog lever for 2
seconds or more.
"Entry" appears in the display and the
phrase is stored.
Retrieving phrases stored in
the phrase bank
You can retrieve a phrase stored in the
phrase bank anytime you want to use it in
a track or disc name.
There are two ways to retrieve a stored
phrase: by displaying the stored phrases
one by one during the labeling procedure,
or by searching the phrase bank by the
first letter of the desired phrase.
Searching for a phrase by displaying
the stored phrase one by one
1
Do the procedure "Labeling
recordings" (page 32) until
" : Name" or "
flashes in the display. Then press the
jog lever.
2
Press X repeatedly until the first
phrase stored in the phrase bank
appears in the display.
36
-GB
: Name"
3
Flip the jog lever or press ./>
repeatedly.
Flipping the jog lever or pressing the
buttons causes the phrases stored in
the phrase bank to appear one by one
in sequential order. If you press X at
this time, the first phrase stored in the
phrase bank retrieved.
4
Press the jog lever while the phrase
you want is shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Searching for a phrase by its first
letter
1
When labeling a track or disc, use
VOL +/– to move the cursor to the
letter which the desired phrase begins
with.
2
Press X to search.
The phrase for that letter appears in
the display. If there are two or more
phrases that start with that letter, press
X to see the next phrase.
3
Press the jog lever while the phrase
you want is shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Erasing phrases
You can erase phrases from the phrase
bank while the recorder is stopped. You
can also erase phrases when the recorder
is empty.
1
Press the jog lever so that "EDIT"
appears, and then press the lever
again.
2
Flip the jog lever until "BankErase"
appears, and then press the lever.