Room Mode Operation; How To Use The Room Mode Operation; Operation By Remote Control; On/Off Automatic Operation Changing The Fan Operation Mode - Toyotomi ETK-S50 Manual De Instrucciones

ETK-S50_US_ES.qxd 14.9.9 9:13 ページ 12
OPERATION PROCEDURE

ROOM MODE OPERATION

The Room Mode is to select each mode depending on room size and room style.
The Room Mode can be set "Manual 4 levels" + "automatic" (During operation, any one mode will be set).
Odor Sensitivity
Living Room Mode High
Dining Room Mode Low
Small Room Mode Normal
Bed Room Mode Low
*1. Fan Speed
The frequency of fan varies depending on each mode even if the fan speed setting is the same.
(e.g.) Living Room Mode
Ion+Rapid

HOW TO USE THE ROOM MODE OPERATION

DISPLAY
AIR QUALITY
BED
4
SMALL POLLEN
DINING 2
1
LIVING
(H)
DUST ODOR ROOM
SMOKE
Room Mode Lamp
1 Press the Room Mode button more than 1 sec. in operation.
• The Room Mode will be on and the Room Mode Lamp will flash on the display.
• When the outlet is inserted for the initial period of time, this mode will start from "Living Room Mode".
When the unit restarts, the previous setting is memorized and start the mode in operation.
2 To switch modes, press this button again during flashing. Set at your desirable mode.
• The Room Mode will flash to light up after a period of time, and the Room Mode is set.
• To select a different mode, start the procedure from 1 again.
• The operation does not start even if pressing the Room Mode button while in shutdown.
12
Dust Sensitivity Air Volume
High
High Normal
Normal Normal
Low
Fan Speed 2 Bed Room Mode
Ion+Rapid
CONTROL PANEL
SMOKE
FILTER
Operation Button
Room Mode Button
OPERATION PROCEDURE

OPERATION BY REMOTE CONTROL

Remote Control Receptor
Max.
AIR QUALITY
Min.
DUST ODOR
SMOKE
Dust Odor
Lamp Lamp
Fan Speed
● Operate the Remote Control by pointing fowards the main unit ( receiver ) .
The maximum signal range is about 7m ( front ) .
●
● Make sure no object obstructs the signal.
1

ON/OFF AUTOMATIC OPERATION CHANGING THE FAN OPERATION MODE

1 Press the ON / OFF button.
● The Air Purifier starts.
● Press the button one more time to stop the operation.
2 Press the Fan Speed button.
● Each press of the operation button changes the operation mode in the following order. Select de-
1
sired operation mode.
● The Auto lamp ( Green ) indicates au-
tomatic operation.
● The Fan Speed lamp ( Red ) indicates
the changing.
BED SMOKE
4
SMALL POLLEN
2
DINING
1
LIVING FILTER
(H)
ROOM
Room Timer
Mode Lamp
Lamp
HOW TO USE THE REMOTE CONTROL
Ion Ion Ion
+ + +
Auto Quiet Standard
1
2
Fan Speed Lamps
Auto
Quiet
Standard
High
Rapid
Ion Ion
+ + Stop
High Rapid
13