Metabo RP 3608DA Manual De Instrucciones página 19

(4) Storing the appliance during breaks (Fig. 25)
Anytime you stop work or take a break from
cleaning, you can quickly store the unit by
hooking the zoom pipe to the pipe holder (the
hole at the top of the unit) so that it stands.
Zoom pipe
Pipe holder
(5) When the appliance is stored (Fig. 26)
After removing the suction opening and hose,
hook the zoom pipe to the pipe holder so that it
stands.
Store the master nozzle, crevice nozzle and
battery in the tool box.
Zoom pipe
Hose id 1-1/2" ×
4.9 ft (id 38 mm ×
1.5 m long)
Crevice nozzle
Pipe hanger
Fig. 25
Master nozzle
Battery
Tool box
(2XC only)
Fig. 26
NOTE
○ When the attachments are stored in the
appliance, do not apply any excess force to the
attachments.
8. How to attach the paper fi lter (Optional)
WARNING
○ Be sure to turn off the appliance and remove
the battery.
○ When using a paper fi lter, use it in combination
with the standard cloth fi lter.
If the paper fi lter gets torn, dust may get inside
the motor, causing abnormal noise or fi re due
to overheating.
CAUTION
When using a paper fi lter, avoid sucking in
liquids such as water or wet dust, as this may
lead to tearing of the fi lter.
(1) Open the paper fi lter horizontally so that the
suction hole in the paper fi lter is over the top of
the tank. (Fig. 27)
(2) Before attaching the fi lter to the appliance,
bend the two folds in the cardboard approx.
90° in the direction of the arrow. (Fig. 28)
(3) Match the suction hole in the paper fi lter with
the suction opening of the appliance. Insert
the fi lter in the direction of the arrow as shown
in the illustration, so that the cardboard of
the paper fi lter goes past the stopper on the
suction opening. (Fig. 29)
Suction hole
Suction opening
(Inside of the tank)
English
Paper fi lter
Fig. 27
19