Whispbar K559W Instrucciones De Montaje página 9

Fitting Kit
Configuration A:
Configuration B:
Use the following grubscrew lengths for
Configuration A:
Front = M6 x 50mm (2")
Rear = M6 x 60mm (2 3/8")
Screw grubscrew into adaptor using hex
key. Tighten firmly.
Repeat for all four positions.
Place crossbar foot over grubscrews.
Proceed to: All Configurations
Use the following grubscrew lengths for
Configuration B:
Front = M6 x 50mm (2")
Centre = M6 x 40mm (1 5/8")
Screw grubscrew into adaptor using hex
key. Tighten firmly.
Repeat for all four positions.
9
EN
K559W