Dirna Mini COOL COMPACT Instrucciones De Montaje página 23

Place (2) fastening supports, with (1) washer
9a
and (1) M6 nut, without tightening.
Glue the two air ducts to front, using
9b
LOCTITE superglue 3 or similar, so that set
assembly is easier and to insure the cold air
flows through the louvers.
Connect (2) 4-way boxes and (3) 2-way ones
9c
of the evaporator front to the Unit ones.
9a
9b
Area where glue
is applied
4 ways
23
dirna
, s.a.
EN
9a
9c
T - 2 ways
2 ways