Safety Instructions - EuroLite FLASHLIGHT TUBE Manual Del Usuario

For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to:
- be qualilfied
- follow the instructions of this manual
INTRODUCTION
Thank you for having chosen a EUROLITE FLASHLIGHT TUBE.
Unpack your FLASHLIGHT TUBE. Before you initially start-up, please make sure that there is no damage
caused by transportation. Should there be any, consult your dealer and do not use the device.

SAFETY INSTRUCTIONS

Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the technical sticker.
USER MANUAL
FLASHLIGHT TUBE
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
CAUTION!
CAUTION!
7