Technical Specifications - Xtrfy XG-M2 Manual De Instrucciones

ADJUSTING CPI AND POLLING RATE
The CPI switch enables you to adjust your mouse sensi-
tivity on the fly. By pressing + or – , you can easily switch
between 400, 800, 1600, 3200 and 4000 CPI. The higher
the CPI setting, the farther the cursor on your screen
will move when you move the mouse.
The Polling rate switch allows you to adjust the respon-
se time of your mouse. A higher Polling rate means
that your mouse will report its position to the compu-
ter more often. 1000 Hz Polling rate= position updated
1000 times every second. On the XG-M2, you can switch
between 125, 500 and 1000 Hz. A high value will impro-
ve precision, but also use more CPU resources.
TROUBLESHOOTING
Make sure the XG-M2 USB connector is firmly attached to your computer's USB port.
Connect to another USB port.
Connect to another computer.
Cursor movement may be affected by white or very glossy surfaces.

TECHNICAL SPECIFICATIONS

The supported platforms for the XG-M2 are all operating systems that support HID 1.1. These
include Windows XP or later, Mac OSX version 10.1 or later. No extra software/driver instal-
lation is needed.
Operates on almost any surface without any pad or tablet
USB connection
2 m cable
Weight: 112 g (excluding cable)
Response: 1 ms
IPS: 130
Max acceleration: 30 g
Warranty: 2 years
GB
2