Haier XQG50-11 Manual Del Usuario página 15

Lavadora y secadora de carga frontal
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
¸
i ii ii ii ii ii ii ii ii ii ii
Note:
For full loads, you may want to remove
1/3 to 1/2 of the load and dry the
remaining
clothes seperately.
This will be an efficient
way to dry your clothes
and will not take as long to dry. For less than full loads, you may want to
reduce drying
time. This will prevent
over drying
of your clothes.
Manual
Operation
of the
Dryer:
• To operate the dryer manually, simply load machine with wet clothes, turn the
"Dryer Selector Knob" to the desired time and push the power button "ON",
Note:
When
operating
the dryer, you must keep "Wash
Cycle Selector"
knob in
the "OFF" position.
Automatic
Operation
of the
Dryer:
• For the automatic operation, simply set the Dry Cycle Selector Knob to the desired
time at the beginning of the wash cycle. When the wash cycle is finished, the
dryer will turn on automatically,
Note:
The dryer will not turn on automatically
if the "No Spin"
button is pushed in,
You must keep the "No Spin"
button in an out position
in order to go from
wash function
to dryer function
automatically,
The dryer will not come on
automatically
after the wool cycle,
Note:
When washing
full load, we recommend
that you keep the spin cycle in the
"OFF"
position
to prevent
the unit from going to dry mode automatically
at
the end of cycle if the spin cycle was in "ON"
position.
This will give you the
flexibility
to take out 1/3 to 1/2 of the load and dry the remainder.
The
advantage
is that your clothes will dry evenly and more quickly.
Loading the Dryer:
1, Sort clothes for drying.
Seperate
dark and light colored
items, like you do for
washing.
Check for stains that have not been removed
in washing.
Dryer heat
may permanently
set some stains, Properly
dried clothes will need minimum
of
care when removed
from dryer.
2, I_oad up dryer with washed
clothes,
For optimum
result, use dryer load of similar
weight,
fabric and construction.
Place small items in a mesh bag to prevent
from
tangling.
Do not overload
the dryer, Add fabric
softener sheet if desired.
3, Select the drying
time depending
on the fabric type and load size.
4, Wait for the drying
cycle to finish before
opening
the door.
Note:
Do not over dry your clothes, over drying
can cause shrinkage,
harshness
and wrinkling
of fabric,
14

Publicidad

Tabla de contenido
loading

Tabla de contenido