Safety Precautions; Technical Data - unotec Qi Round Manual De Uso

INSTRUCTION MANUAL
Introduction
Wirelessly charge your smartphone or tablet with the Qi inducti ve charger basis. Just connect the base with the Micro USB cable
to a mains charger or a computer and forget forever the charging cables. By just putti ng the phone or tablet on the base it begins
charging. The charging cradle is universal for all those smartphones or tablets that have the standard inducti on charging Qi.
Before using the product, please read this manual carefully to ensure a safe use.

Safety Precautions

Never try to open the product, it could cause fi re or an electric shock.
Do not use the product near water or other liquids. It could cause an electric shock.
Do not att empt to plug or unplug the AC adapter with wet hands, as this could cause a fi re or electric shock.
Do not use a power that is not appropriate for the adapter, it may cause a fi re.
Do not damage the AC adapter, it could cause fi re or electric shock.
Do not charge the product when it is covered by a blanket, it could cause fi re or burns.
Do not place objects between wireless charging points and charging equipment, it could cause a fi re or burns.
Temperature: -20 to 40 ° C
Please unplug the AC adapter when not in use.
Place the charger on a fl at, stable surface to prevent falls.
Please, when using this product, do not leave it near magneti c cards, mass storage devices and precision instruments, it may
cause data loss or damage to the devices.
Periodically clean dust from the AC adapter to avoid possible fi re or electric shock.
Make sure the AC adapter is plugged in completly and correctly to avoid possible fi re or electric shocks.
Keep away from people with pacemakers, as the electromagneti c waves generated during use of the charging device can aff ect
the normal operati on of the pacemaker. If you use a pacemaker, consult your doctor before using this product.

Technical data

Dimensions / Weight: 69 x 9mm / 50g
Power Interface: MicroUSB
Charger input: 5V, 1000mA
Charger Output: 5V, 700mA
Standard charge: Qi standard
Instructions for wireless charger
Two ways of powering:
Connected via USB cable to a power adapter
Output voltage: 5V
Power: external power adapter 1A-2A,
Connected via USB cable to a computer
The charging ti me may vary depending on the power output of the external power supply.
Aft er connecti ng the base to the external power source, place properly the device to load within the charging area in the charger
base.
When the charger detects the phone, a green indicator lights to noti fy that it has detected the mobile device. During the charging
process, the indicator fl ashes on.
Any device that meets the Qi standard can use this Qi wireless charger for charging.
htt p:/ /www.wirelesseffi ciency.com/pages/qi-enabled-wireless-charging-smartphone-listi ng-2013/
Make sure your phone is compati ble with Qi technology. If not, you can fi nd in our catalog inducti on packs including the charging
adapter for a variety of smartphones.
Content
1x Wireless Charger
1x MicroUSB Cable
Specifi cati ons and informati on may be subject to change without noti ce. The manufacturer assumes no responsibility for any
errors or omissions in this document.
4
ENGLISH