Configuration Setup With Smartphone Connection - ideus TR30 Manual Del Usuario

14) You will see the shortcut you just created：

5.3. Configuration setup with Smartphone connection

Following will show how to configure the Bluetooth connection on Smartphone. It may
be different from other Smartphone models.
1) Power on your Smartphone and the Bluetooth host.
2) Power on the GPS Receiver. If the battery is ready, you should see 2 LEDs indication：
the blue for Bluetooth blinks 3 times/sec. It means the Bluetooth module is activated and
waiting for connection. The red LED for GPS, means the GPS module is activated and is
inquiring GPS signal.
Red LED
Blue LED blinks 3 times/sec
-59-