Technical Specifications; Maintenance And Storage - Hudora 71663 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the
product. Therefore, please store them and the packaging carefully in case questions arise
in the future. Please always include these instructions when handing on the product to a
third party. This product must be assembled by an adult. This product is not designed for
industrial use. The use of the product requires certain capabilities and skills. Always adjust
according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS:

Item: Basketball stand Chicago
Item number: 71663, 71658
Weight: ca. 15 kg
Height-adjustable: 206 - 260 cm
Purpose: Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the product, we have all
you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not required for the
installation and use of the product.
GENERAL TRAINING PRINCIPLES
1. Warming up:
Warm up before each exercise routine. Walk or run in place, stretch or light calisthenics as
a warm-up before using the home trainer.
2. Respiration:
The correct respiration plays an important roll in training. Breathe quietly and uniformly.
Never stop breathing during training.
3. Clothing and place:
Dress in comfortable clothing during training and see that you have a sufficient place for the
execution of the exercises. Always wear sport shoes, do not train with bare feet, sandals,
or stockings.
4. Cooling down:
Cool yourself down after the training with easy stretching or calisthenics. This way your
heart rate can slowly decrease and the body can regenerate more quickly for the next
exercise routine because the metabolic waste (Lactate) can be more efficiently disposed
of with slow cool downs.
5. Health:
Quit your exercise immediately if you notice a pulling in the muscles or general pain as you
practice. Contact a physician for your safety.
USE: Ensure that the equipment is in a firm and stable position. Adapt the training time to
your performance capabilities, and do not over-tax yourself.
WARNING: As a matter of course, you should consult your doctor before starting to train.
SAFETY INSTRUCTIONS
• This training equipment is NOT a toy! Use the basketball stand for its intended purpose
only.
• This piece of training equipment is only suitable for private use. If it is used commercially,
any guarantee is invalidated.
• Warnings! The stand must be properly secured at all times to prevent toppling.
• Place the basketball stand on a firm and level surface and make sure this piece of
equipment is positioned securely and firmly.
• Always fill the base with sand (or water) so that the stability of the basketball stand is
assured and it won't fall forwards. We would recommend filling the base with sand
rather than water as water will flow out if there is a hole. This could cause the product
to fall over and cause damage to objects or injury to people.
• Check that all connections have been tightly fastened before using the basketball stand
and check again later!
• Before each use, check that the basketball stand is set up correctly and never use it if
it is not working properly.
• Check the basketball stand regularly for defective parts and replace them. Use original
spare parts only.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand could tip over.
• Never allow children to play in the immediate proximity of this piece of training
equipment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in such a way
that they cannot catch in anything during the training due to their fit.
• Always wear training shoes, and never train in bare feet, or when wearing sandals,
socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• If you start to feel unwell, discontinue training immediately.
All images are examples of the design.
TOOLS REQUIRED
• 8 mm Allen key
• 13 mm Allen key
• Hammer (not supplied)
• Spirit level (not supplied)
• Cross-head screwdriver
ASSEMBLY INSTRUCTIONS
Step 1:
Place the lower vertical tube (9) on the basemoulded part (10) at the intended position. Slide
the axle (11) through the wheels (12) as well as the drill holes in the lower vertical tube and
in the basemoulded part (Fig. 1)
Step 2:
Connect the base -moulded part (10) with the two lower diagonal struts (13 + 14) and the
lower vertical tube (9). You should for this purpose use the screw (20) on the base -moulded
part, the screw (17) on the lower vertical tube, as well as on both screw flat washers (24)
and nuts (25). (Fig. 2)
Step 3:
Fill the base-moulded part (10) with sand (or water) and close it with the cover (15). (Fig. 3)
Step 4:
Loosen the two grub screws (18) of the lower vertical tube (9) and insert the middle vertical
tube (8) into the lower tube. Make sure that the middle grub screw of the middle tube is
aligned backwards. Then firmly retighten the grub screw (18) of the lower vertical tube (9).
(Fig. 4)
Step 5:
Mount the net (3) on the basket ring (2). (Fig. 5.1 and 5.2)
Step 6:
First insert the plastic washers (26) from the rear side into the 4 drill holes on the bottom
side of the basket board. Then connect the basket ring (2), the board (1) and the upper
vertical tube (7) with each other. You should for this purpose use the screws (16), flat
washers (22) and nuts (23). (Fig. 6)
Step 7:
First insert the plastic washers (26) from the rear side into the upper 3 drill holes of the
basket board. Connect the board (1) and the upper vertical tube (7) from the bottom up in
the order 4, 5, 6 with the diagonal struts. You should for this purpose use on the board the
screws (21), flat washers (22) and nuts (23), on the top tube, the screw (19) as well as flat
washer (24) and nut (25). (Fig. 7)
Step 8 - Height adjustment:
Loosen the grub screw (18) of the middle tube (8) and insert the upper vertical tube (7) to
the desired height into the middle tube (8). Then firmly retighten the grub screw. The height
of the basket can be steplessly varied between 206 cm and 260 cm. Make sure that the
upper tube is inserted at least 11 cm into the middle tube in the fully assembled condition.
The marking line on the upper tube should thereby not longer be visible. (Fig. 8)
WARNING: The height of the basket ring must never exceed 260 cm from the ground.
WARNING: Never use the basketball stand without first having filled the base section with
water or sand.
TRANSPORTING THE STAND
Grasp the central post with both hands and fix the base with your left foot. Tilt the basketball
stand towards you until you can move it using the mounted wheels. Once you have
transported the stand to where you want it, return it carefully to an upright position.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Do
not make any structural changes. For your own safety, please use original spare parts only.
These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners
should develop, the product may not be used any more. If in any doubt, please contact our
service team (http://www.hudora.de/). Store the product in a safe place where it is pro-
tected from the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point pro-
vided in your area. Local waste management companies will be able to answer your que-
stions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. Therefore, you can find numerous information on the
product, replacement parts, solutions to problems and lost assembly manuals at http://
www.hudora.de/service/.
7/12