Hoover HESD4 WIFI Manual De Instrucciones página 77

Nível de potência A zona
automaticamente após
6q:
;q65
66q69
6:
de cozedura desliga-se
8 horas
4 horas
2 horas
1 hora
Selection of installation equipment
Cut out the work surface according to the sizes
shown in the drawing.
For the purpose of installation and use, a
minimum of 5 cm space shall be preserved
around the hole.
Be sure the thickness of the work surface is at
least 30mm. Please select heat-resistant work
surface material to avoid larger deformation
caused by the heat radiation from the hotplate. As
shown below:
L(m W(m H(m
m) m) m)
590 520 60
Under any circumstances, make sure the
Induction cooker hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the
Induction cooker hob is in good work state. As
shown below
Note: The safety distance between the
hotplate and the cupboard above the
hotplate should be at least 760mm.
JIKI D HJ
JIKI B HJ
A(mm) B(mm) C(mm)
760 50
mini
PT-5
D(m A(m B(m
m) m) m)
56 560+ 490+
4 4
+1 +1
JIKI D JJ
D
20 Air Air exit
mini intake min.5mm
X(m
m)
50
mini
E