Descargar Imprimir esta página

Sears Kenmore 116.20212 Manual Del Proprietário página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Alwaysfollowallsafetyprecautions when
cleaning andservicingthe POWER-MATF_.
E
• _
WARNIN
.....................
G
Electrical
Shock
Or Personal
Injury
Hazard
Disconnect
electrical supply before
servicing
or cleaning
the unit,
Failure
to do so could result
in elec-
trical shock
or personal
injury
from
cleaner
suddenly
starting.
HALF LIGHT POWER'MATE
TM
1. Remove light
cover by lifting at
arrow as shown°
2. Push in and turn
bulb counterclock-
wise to remove°
3. Replace the
bulb_ Bulb must not
be higher than 15
Watts. Close light
cover until it snaps
in place_
P
/
/
_ Push tn
NOTE: See PARTS AND FEATURES for
Bulb #.
FULL LIGHT POWER-MATE
TM
1, Remove light
cover by pressing
in and lifting both
sides as shown_
2. Push in and turn
bulb counterclock-
wise to remove°
3. Replace the
bulb Bulb must not
be higher than 15
Watts° Close light
cover until it snaps
in placer
Push In
And Turn
NOTE: See PARTS AND FEATURES
for
Bulb #.
Disconnect
cleaner
from electrical
outlet.
Check and remove hair, string and lint build-
up frequently
in the POWER-MATE
TM
brush
and brush support areas. If build-up
becomes
excessive, disconnect
POWER-
MATE
TM
from wand and follow the steps
below_ instructions
can also be found under
the light cover
TO REMOVE
BELT:
1. Remove light cover
and light bulb as
shown under LIGHT
BULB CHANGING.
2. Unscrew the
POWER-MATE
TM
cover screws.
15

Publicidad

loading

Este manual también es adecuado para:

Kenmore 116.20312