Grounding Instructions - DeWalt DWV010 Manual De Instrucciones

• arsenic and chromium from chemically-treated lumber.
To reduce your exposure to these chemicals, wear approved safety
equipment such as dust masks that are specially designed to filter
out microscopic particles.
For your convenience and safety, the following warning labels are
on your vacuum.
ON MOTOR HOUSING (on back of vacuum head):
WARNING:
• THIS VACUUM MEETS THE EPA LEAD RELATED
RENOVATIONS, REPAIR AND PAINTING (RRP) RULE FOR
HEPA VACUUM ONLY IF DWV9320 OR DWV9330 HEPA
FILTER IS USED.
• TO REDUCE THE RISK OF INJURY, USER MUST READ
INSTRUCTION MANUAL. DO NOT RUN UNATTENDED.
DO NOT PICK UP FLAMMABLE, COMBUSTIBLE OR
HOT MATERIALS. DO NOT USE AROUND EXPLOSIVE
DUST, LIQUIDS OR VAPORS. ELECTRICAL DEVICES
PRODUCE ARCS OR SPARKS WHICH CAN CAUSE FIRE
OR EXPLOSION. DO NOT USE AT FILLING STATIONS OR
ANYWHERE GASOLINE IS STORED OR DISPENSED. DO
NOT VACUUM TOXIC OR CARCINOGENIC MATERIALS
OR OTHER HEALTH ENDANGERING MATERIAL SUCH
AS ASBESTOS OR PESTICIDES. ALWAYS USE PROPER
EYE AND RESPIRATORY PROTECTION. TO REDUCE THE
RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE TO
RAIN. STORE INDOORS. WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS. NOT TO BE USED
AS A STEP STOOL. (THE USE OF THIS MACHINE IN
CONJUNCTION WITH THE PICK UP OF LEAD HAS NOT
BEEN INVESTIGATED BY UL)
CAUTION: RISK OF FIRE AND INJURY. DO NOT EXCEED
15 AMPS. THE RECEPTACLE IS ENERGIZED WHEN THE
VACUUM IS ON OR WHEN TOOL CONTROL IS ACTIVE. WHEN
TOOL CONTROL IS ACTIVE, THE VACUUM WILL TURN ON
AUTOMATICALLY WHEN THE APPLIANCE CONNECTED TO THE
RECEPTACLE IS TURNED ON.
SAVE THESE INSTRUCTIONS

Grounding Instructions

This appliance must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This appliance is
equipped with a cord having an equipment-grounding conductor
and grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
WARNING:
Improper
connection of the equipment-
grounding conductor can result in a
risk of electric shock. Check with a
qualified electrician or service person
if you are in doubt as to whether the
outlet is properly grounded. Do not
modify the plug provided with the
appliance – if it will not fit the outlet,
have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120-volt circuit and has a
grounding attachment plug that looks like the plug illustrated in
Figure A. Make sure that the appliance is connected to an outlet
having the same configuration as the plug. No adaptor should be
used with this appliance.
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
3
FIG. A
GROUNDED
OUTLET
GROUNDING
PIN