Adjustment Instructions; Cleaning And Maintenance - Bionaire BSF1613MW Manual De Instrucciones

3. Turn knob at the top of the motor housing to select
the desired fan speed or turn it off: "0" for Off, "1"
for Low Speed, "2" for Medium Speed, and "3" for
High Speed.
4. To oscillate the fan head, push the oscillation button
" " at the top of the motor housing down. To
stop the oscillation, pull the oscillation button "
up.
Models BSF1613EW and BSF1613EB
1. Set fan on a dry, level surface.
2. Plug power cord into the appropriate outlet.
3. Press the power button "
status between on or off.
4. The speed is adjustable by pushing the speed
button " " to cycle the speed mode into three
speed levels; Speed 1, Speed 2, Speed 3.
5. To oscillate the fan head, press the oscillation
button to turn it on. To stop the oscillation,
" "
press the oscillation button
6. If you would like to program the timer to set the
number of hours you would like to keep the fan
on, press the timer button "
setting into the following options: 1 hour, 2 hours,
4 hours, 8 hours. Press again to turn timer off. The
fan will automatically turn off once the set time is
reached.
7.
To operate the breeze or sleep modes, press the
button " ". The breeze mode "
circulates through the speed settings to simulate
a natural breeze. The sleep mode "
through the speed settings in order. Press again to
turn off.
REMOTE CONTROL HANDHELD UNIT
(Models BSF1613EW and BSF1613EB
only)
• The remote includes control buttons for Power on/
off " ", Speed Selections "
Breeze/Sleep Modes "
• Your remote control requires 2 AAA batteries (not
included) for operation.
• Install the 2 AAA batteries in the rear compartment
of the remote, according to the diagram shown
inside.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
BSF1613-LA_13MLM1.indd 3
"
" to change the power
again.
" "
" to select the timer
" randomly
" cycles
", Timer " ", and
".
3
ADJUSTMENT
INSTRUCTIONS
HEIGHT ADJUSTMENT
This fan is equipped with an expandable pole, which
allows you to adjust the height of the fan according to
your preference.
TILT ADJUSTMENT
To change the tilting angle of the fan head, move the
fan head manually to the desired angle.
CLEANING AND
MAINTENANCE
Follow these instructions to correctly and safely care
for your fan.
• Always unplug the fan before cleaning or
disassembling.
• Be sure to clean your fan with a soft cloth
moistened with a mild soap solution.
• Do not allow water to drip on or enter into the fan
housing.
• Do not use gasoline, thinner, or benzene as a
cleaner.
• Lightly run a vacuum cleaner nozzle over the fan
grill to remove any dust or dirt that may have
accumulated.
FAN BLADE CLEANING
INSTRUCTIONS
This fan is equipped with a removable grill that allows
the consumer to remove the grill and its components
without the need of any tools.
Make sure the fan is unplugged before disassembling
and cleaning the fan blade. Carefully remove the front
grill. Wipe the blade with a soft cloth moistened with a
mild soap solution. DO NOT allow any liquid to drip into
or enter the motor housing. Snap the front grill onto the
fan. Make sure all parts are secured prior to operating
the fan.
FAN STORAGE
When storing your fan please use the original box. It is
important to keep it in a safe, dry location.
• Store your fan in the original box or an
appropriately sized box.
• Protect the fan head from dust.
• Store your fan in a dry location.
7/18/13 8:39 AM