Gemini MDJ-1000 Manual De Instrucciones página 6

c o n n e c t i n g t h e
p o w e r
Plug in the power supply of the MDJ-1000 into
the DC IN (A)
l i n K o u t
Plug in the LAN cable into the LINK OUT (C)
on the rear panel. Plug the other end of the
LAN cable into another MDJ-1000 LAN port.
This will enable you to use the MDJ-1000 in
LINK mode. If you are using more than 2 MDJ-
1000's plug the LAN cable into each MDJ-
1000. Plug the other end into a compatible
router.
u s b o u t
Plug in the USB cable into the USB OUT (B)
on the rear panel. Plug the other end of the
USB cable into any available USB port on
your computer. This will enable you to use the
MDJ-1000 in MIDI mode.
6
m d J -
1 0 0 0
DC IN
12V 5.0A
DESIGNED AND ENGINEERED IN THE USA BY GEMINI, PRODUCED IN CHINA
DC IN
12V 5.0A
DESIGNED AND ENGINEERED IN THE USA BY GEMINI, PRODUCED IN CHINA
c o n n e c t i o n s
l i n e o u t p u t
Plug one end of the included RCA cable into
the LINE OUTPUT JACK (D) on the rear panel.
Plug the other end of the RCA connectors into
any available line input jacks on your mixer.
If you are connecting the MDJ-1000 through
a receiver, you can plug the RCA connectors
into the CD AUX INPUT JACKS on your receiv-
er. If there are no CD or AUX INPUTS use any
line level (not phono) inputs.
d i g i ta l o u t
Plug a S/PDIF cable (not included) into the
DIGITAL OUT on the MDJ-1000 (E) and into
any DIGITAL IN port on any device. This will
send the digital audio to that input. Possible
applications include using the DIGITAL OUT to
record or to feed to a DAW (Digital Audio
Workstation)
-
m d j 1 0 0 0
.
m a n u a l • g e m i n s o u n d c o m