Child Lock; Using The Child Lock Function - Samsung WA40J3000A Serie Manual Del Usuario

washing a load of laundry

Child Lock

Child Lock disables the buttons on the control panel and prevents children from playing with the
washer.
Activating the Child Lock function
Press and hold the temp. and load size buttons simultaneously for approximately 3 seconds.
• All buttons and controls on the panel are disabled except for the Power button.
• The Child Lock icon blinks.

Using the Child Lock function

If the lid is opened when the Child Lock function is on, the Hot LED illuminates and an alarm sounds.
• If the water level in the tub is above the safe water level, the Hot light illuminates on the LED
display and the washing machine starts to drain after 30 seconds.
• If the water level in the tub is above the safe water level and the Child Lock function is turned
on while the door is open, the Hot, Tap cold, Extra large, and Small lights illuminate on the
LED display even if the power is turned off and the washing machine starts to drain.
• If the power is off and the lid is opened while the water level in the tub is above the Reset
water level, the Hot, Tap cold, Extra large, and Small lights illuminate on the LED display
and the washing machine starts to drain. When the draining operation finishes, the power is
automatically turned off again.
• If you activate Child Lock while the washing machine is running, the Start/Pause button will
not work.
• After the compulsory drain, the Hot, Tap cold, Extra large, and Small lights blink at 1 second
intervals and the product enters the Hot, Tap cold, Extra large, and Small light mode. (When
the product is in the Hot, Tap cold, Extra large, and Small light mode, only the power button
works.)
• To cancel the Hot, Tap cold, Extra large, and Small light mode, you need to turn the power
off and then on again.
• To cancel the Hot light mode, deactivate the Child Lock function. To deactivate the Child
Lock function, press and hold the temp. and load size buttons simultaneously for at least
3 seconds.
adding laundry when child lock is on
• To add laundry, deactivate the Child Lock function. To deactivate the Child Lock function,
press and hold the temp. and load size buttons simultaneously for at least 3 seconds.
Deactivating the Child Lock function
Press and hold both the temp. and load size buttons simultaneously for approximately
3 seconds.
• When you deactivate the Child Lock function, the Child Lock light turns off.
• The Child Lock function prevents children or the infirm from accidently operating the washer
and injuring themselves.
• If a child enters the washing machine, the child may become trapped and suffocate.
warning
• Once you have activated the Child Lock function, it continues working even if the power
is turned off.
caution
• Forcing the lid open can result in injury or damage to the product.
WA3000J_WA40J3000AW_USER MANUAL_DC68-03520A-10.indd 20
English - 20
2016/6/27 19:11:17