Publicidad
Idiomas disponibles
Idiomas disponibles
Playing Audio Files on a USB Flash Drive
To play audio files on a USB flash drive:
1.
If the unit is off, press the Power button to power it on.
2.
Connect your USB device (mass storage class) to the USB Port.
3.
Select USB as your desired media type (described in
4.
Select an audio file:
•
When a USB flash drive is first connected, files on the root directory will be shown. Press and hold the Folder button to
open to the first folder. All files within that folder will appear first. All other playable content on the flash drive will appear
after. To access another folder, press and hold the Folder button again.
•
To move through audio files, press the |<</<< and >>/>>| buttons.
•
Press one of the Number buttons (0–9) to enter the desired track number. If the track number is two digits, press the
buttons in succession (e.g., 1 then 2 for Track 12).
In USB Mode, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To stop playback, press the Stop button.
•
To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will rewind/fast-forward at
5 times the normal playback speed. To resume playback, release the button.
•
To change the view mode, press the Folder/Time button.
•
To select another folder or audio file, follow the steps described in Step 4 above.
•
To show different track information in the display, press the Text button. It will cycle through the file name and other text
information.
•
To select a Repeat Playback mode, press the Repeat button. It will cycle through Repeat One
repeat indefinitely), Repeat All
•
To select the Play Mode, press the Random button. It will cycle through Random
[for up to 256 tracks]), and Single Play () (the current track will play until its end and then stop).
•
To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much time has elapsed
of the current track) and Remaining (how much time remains of the current track).
•
To remove a USB device, gently remove it from the USB Port when it is not playing. (Removing a USB device while it is
playing can damage it.)
Playing Audio from a Bluetooth Device
To play Bluetooth Tracks:
1.
If the unit is off, press the Power button to power it on.
2.
Select Bluetooth (BT) as the media type (described in Selecting the Media Playback Mode).
3.
Navigate to your Bluetooth device's setup screen, find "PMD-526C" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
In Bluetooth Mode, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To pause playback, press the Stop button.
•
To see a list of Bluetooth devices, press the Device Sel. button. The screen will show "BT Device List". Use the |<</<< and
>>/>>| buttons to navigate through the list of Bluetooth devices. When you find one you want to pair to, select it by pressing
the Jog Dial.
•
To disconnect from a paired Bluetooth device, press and hold the Pairing button for 1.5 seconds. If you have set a custom
Bluetooth pairing password, it is required to input this password before pairing. If a custom password was not set, (factory
default: 0000) it is not required to input the password.
•
To remove the list of paired devices and disconnect from any currently paired device, press and hold the Clear button
to remove all paired devices from the unit's memory (and also unpair from a currently paired device). After the devices have
been cleared from the unit's memory, to connect again to the same device, go to your Bluetooth device and select "Unpair"
or "Forget the Device", depending on the type of device that you have. You can then select PMD-526C from your list of
Bluetooth devices and connect.
Selecting the Media Playback
(the list of all tracks will repeat indefinitely), and Repeat Off (no tracks will repeat).
Mode).
(the same track will
(the tracks will play in a random order
11
Publicidad
