Vimar Eikon 20441 Manual De Instrucciones página 27

Deleting the password.
Turn off reduction with the relevant switch, select the CnF menu
and then proceed as follows:
- press the key; you are then asked to enter the password (000
digits blinking);
- turn on the reduction with the relevant switch;
– +
- using the " " " " keys, enter 100 and wait for the timed exit from
the menu .
The password has then been deleted and its setting will return to
000 (default value) .
• Season selection.
Used to select the required season for the set-points .
The selection of the season can only be carried out as described
in section 5 .2 .
• TEMPERATURE SET POINT.
Used to set the set point for the previously selected season .
From the CnF menu, press the
displayed (blinking); then, using the "
value .
key until the set point is
– +
" " " keys, set the required
• REDUCED TEMPERATURE SET POINT.
Used to set the reduced temperature set point for the previously
selected season .
From the CnF menu, press the
displayed (blinking); then, using the "
value .
The setting can be made from 5 °C to 35 °C .
In air-conditioning operation it is also possible to select the off
mode (OFF) .
• ANTIFREEZE.
Used to select the antifreeze operating mode .
From the CnF menu, press the
displayed and, using the "
value (5 °C) or OFF (thermostat off on antifreeze) .
key until the set point is
– +
" " " keys, set the required
key until the antifreeze is
– +
" " " keys, set the fixed antifreeze
ENGLISH - 23