Operation And Use; Switching Off The Appliance - Beem Bi-Turbo Accustar Manual De Instrucciones

Bi-Turbo Accustar

Operation and use

Using the appliance
Charge the battery as described in the
‹
section Charging the battery
(page 21).
Insert the desired nozzle (9;10;11) into
‹
holder (12) of the dust container.
Switch on appliance
Push the ON/OFF switch (3) to the
‹
"ON" position to switch on the vacu-
um cleaner and the turbo brush.

Switching off the appliance

Push the ON/OFF switch (3) to the
‹
"OFF" position to switch off the vacu-
um cleaner and the turbo brush
Using the turbo brush
Switch off the appliance.
‹
Remove the turbo brush (11) from the
‹
holder (16) on the charging station.
Insert the turbo brush into the dust
‹
container (12).
NOTE!
► Make sure that the turbo brush is
completely inserted.
22
Application overview
Application
■ Upholstery/car
seats
■ Furniture
■ Joints, corners,
difficult locations
to access
Empty dust container
To empty the dust container (8), proceed
as follows:
Switch off the appliance.
‹
Press the unlocking button (4), hold it
‹
down and pull the dust container off
the hand vacuum cleaner.
Empty the dust container.
‹
Clean the dust container as described
‹
in the section Cleaning the dust con-
tainer (page 23).
Push the dust container back onto the
‹
motor unit until it engages.
BEEM - Elements of Lifestyle
EN
Attachment
Joint nozzle
Textile brush
Turbo brush
Textile brush
Joint nozzle