Cleaning And Maintenance - IMASS A3 Prime Clean Manual De Instrucciones

English

Cleaning and maintenance

Cleaning the lateral brushes
Clean the lateral brushes and replace them if they are damaged.
Note: Before replacing the lateral brushes, check the L & R markings on the two lateral brushes and make sure
they match the corresponding markings on the undercarriage of the robot.
Cleaning the main brush
A) Turn off the robot vacuum cleaner. Press the twotabs on the main brush cover to remove the mainbrush.
Remove the main brush from the right. Use thesupplied cleaning kit to remove hair and other dirt fromthe main
brush.
B) Rinse the main brush under running water and donot replace it until it has dried completely.
Main brush cover
Main brush
034
Cleaning the dust box and the filter
Hold the dust box in a horizontal position and press the yellow unlocking button to open its lid -- empty the dust
box -- remove the filter -- rinse the dust box, the filter webbing and the sponge filter under running water -- dry the
dust box, filter webbing and the sponge filter completely before replacing them in the robot.
Remark:
Unlocking button for the
1) Switch off the robot and disconnect
dust box (yellow)
thedocking station plug before cleaning
andmaintaining the robot.
2) Check that there are no objects in the suctionintake and then clean
it.
3) The filter lasts for 24 months; please clean the filter once or twice
a month.
4) Make sure that the dust box, the filter webbing and the sponge filter are completely dry beforereplacing them.
(Note: Do not expose the filter to direct sunlight for extended periods).
Cleaning the cliff sensors and charging contacts
Use a soft dry cloth to gently clean the sensor window and the charging contacts.
Note: Clean the charging contacts on the docking station if they are dirty.
Charging contacts
English
Cliff sensors
035