Descargar Imprimir esta página

Carpoint 0114030 Manual De Usuario página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EMERGENCy LIGHT • USER MANUAL
FEATURES
1. torch
2. TL light
3. red blinking light
4. orange blinking light
5. 12V adapter
A. head cap release button
B. function switches
B1. torch on or TL on
B2. double blinker on or red blinker on
B3. battery charging on/off
C. battery case lid
D. head cap ring
E. TL light cover
F. red blinking light cover
G. end cap cover
H. end cap ring
I. orange blinking light cover
J. car plug jack
INSTRUCTIONS
• to install batteries: slide and open the battery case lid (C), insert six 1.5V LR14 batteries (not included).
• to use car battery adapter plug: insert the 12V adapter (5) in the car plug jack (J) and into the cigarette lighter socket of the
car.
• to operate the light: slide switches (B) in desired position.
• to replace the torch bulb: press the head cap release button (A) and remove the head cap and the ring (D). Replace the bulb.
Put the ring and the head cap back in place.
• to replace the TL light: press the head cap release button (A) and remove the head cap and the ring (D). Remove the TL light
cover (E) and replace the light. Put the cover, the ring and the head cap back in place.
• to replace the red blinking bulb: press the head cap release button (A) and remove the head cap and the ring (D). Remove
the red blinking light cover (F) and replace the light. Put the cover, the ring and the head cap back in place.
• to replace the orange blinking bulb: slide and open the battery case lid (C) and remove the batteries. Remove the end cap (G)
by unscrewing the screws, and remove the end cap ring (H). Remove the orange blinking light cover (I) and replace the bulb.
Put the cover, the ring, the end cap, the batteries and the lid back in place.
wARNING
The unit is NOT waterproof; do not use in rain or wet environment. Replace the bulbs with bulbs of same type; bulbs of different
type may cause damage to the unit and/or fire hazard. Use a damp cloth to clean the unit. Do not use any solvent or detergent,
it may damage the surface finish. Remove the batteries when the unit is not in use for a longer period.
1
1

Publicidad

loading