OBJ_BUCH-88-003.book Page 23 Thursday, December 14, 2006 10:30 AM
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Machine-specific Safety Warnings
Cordless Screwdriver
Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
Avoid unintentional switching on. Ensure the On/Off
switch is in the off position before inserting battery
pack. Carrying the power tool with your finger on the On/Off
switch or inserting the battery pack into power tools that have
the switch on invites accidents.
Protect the battery against heat, e. g., also
against continuous sun irradiation and fire. There
is danger of explosion.
2 609 001 148 • 14.12.06
English | 23