Basic Operation - Sharp AY -XP08CE Manual De Instrucciones

BASIC OPERATION

AM
DISPLAY
FULL
POWER
MODE
1h
FAN
SWING CLEAN
SET/C
Press the MODE button to select the op-
1
eration mode.
Press the ON/OFF button to start opera-
2
tion.
• The red OPERATION lamp (
2
will light.
5
Press the THERMO. button to set the de-
3
3
sired temperature.
• In the AUTO and
1 DRY mode, the tem-
perature
changed
incerments within the
range of 2°C higher
to 2°C lower from the
temperature auto-
4
matically determined
by the air conditioner.
• In the COOL and HEAT modes, the tempera-
ture can be set within the range of 18 to 32°C
• In the FAN ONLY mode, the temperature
setting cannot be made.
Press the FAN button to set the desired fan
4
speed.
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
• In the FAN ONLY mode, the fan speed can-
not be set to AUTO.
To turn off the unit, press the ON/OFF but-
5
ton again.
• The red OPERATION lamp (
will turn off.
E-8
AUTO HEAT COOL DRY FAN ONLY
(Example: 1°C higher)
can be
in 1°C
(Example: 2°C lower)
AUTO SOFT LOW
) on the unit
C
C
HIGH
) on the unit