Fermax SKYLINE LYNX Serie Manual De Instalador página 33

L L L L L YNX Sk YNX Sk YNX Sk yline yline
YNX Sk YNX Sk yline yline yline Amplif
L L L L L YNX Sk YNX Sk YNX Sk
YNX Sk yline
YNX Sk
- The DIGITAL panel may be configured via the Display and the
Keypad. See the LYNX Digital Panels Programming manual
code 970015 at www.fermax.com.
- The DIGITAL panel may be configured remotely via the
incorporated web server. This web server can be accessed via
the panel´s IP address. For more details see the LYNX Panel's
Web server manual cod. 970020 at www.fermax.com.
- The panel´s IP address can be configured by choosing between
different modes: Standard Lynx mode (default selection.
Digital panels IP: 10.200.100.0) / DHCP mode / Static IP mode.
For more details see the LYNX Panel´s Web server manual
code 970015 at www.fermax.com.
- To add users to the panel you need the Property Management
Unit (Guard Unit) software. For more details see the PMU manual
code 970021 www.fermax.com.
- A DIGITAL panel may be configured both as a BLOCK panel
and as a GENERAL ENTRANCE panel.
- It is very important that the default addresses
mode - default selection) are not used in real installations in
order to avoid possible IP
Amplif Amplif
Amplif Amplif ier
yline yline Amplif Amplif
yline Amplif Amplif ier
yline Amplif
ier ier
ier ier
ier ier
ier
ier
conflicts.
(standard Lynx
Pag 33