Wireless Ipod Dock Operation - iSymphony V1BLUE Manual De Usuario

WIRELESS iPod DOCK OPERATION

The Wireless iPod Dock allows you to stream music over a Bluetooth connection and remotely control the
iPod's functions.
Getting Started
Ensure the Wireless iPod Dock is connected to AC power and powered on.
Ensure the Wireless iPod Dock is paired and connected to the main unit. Refer to page 32.
Select "iPod/BLUETOOTH" mode on the main unit using the FUNCTION/
Choosing the Correct Adapter
When connecting an iPod to this iPod Dock, please ensure that the correct adapter
!
plate is used. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE iPod.
This iPod Dock comes with 4 removable dock adapters. Using the
correct adapter ensures the proper fit for your iPod and helps to
reduce the stress on the connector when operating the iPod.
NOTE: The adapter for iPod nano is already installed in the dock.
To place a dock adapter:
Refer to the compatibility table below and select the correct dock adapter
for the iPod.
Place the proper adapter into the dock and press it into position. The
adapter will only go in one way. The iPod dock connector should fit
through the opening in the bottom of the adapter.
Carefully align and then gently insert the iPod into the dock. (The iPod
must not be in a case or "skin").
To remove a dock adapter, first remove the iPod, then grip the adapter
and pull gently upwards.
NOTE: The Wireless iPod Dock will charge a docked iPod even when powered off.
PC Connection
A docked iPod can be connected to a PC using the
iPod USB Sync socket on the rear of the iPod Dock.
Connect the iPod USB cable to the iPod USB sync
socket on the rear of the iPod dock (cable not included).
Connect the other end to the USB port on a PC.
Files can be up loaded to the iPod using iTunes. Refer to
iPod user guide for details.
button.
iPod dock
8
Dock Adapter Compatibility
5G with Video
nano
(1st generation)
nano
(2nd generation)
photo
4G
mini
3G
Playing Music From Your iPod
Press PLAY on the iPod, main unit or remote. The music playback will start.
The AVRCP Remote Control connection allows you to control all of the iPod's functions including menu
navigation from the remote control, and to select tracks, play, pause and stop and from the main unit.
Control Location
Main unit, remote
Main unit, remote
Main unit, remote
MENU Remote
SELECT Remote
+ Remote
USB
Connector
- Remote
A B C
30GB
X
60GB
X
80GB
1GB
2GB
4GB
2GB
4GB
8GB
X
20GB
X
30GB
X
40GB
X
60GB
X
20GB
X
40GB
X
4GB
X
6GB
X
10GB
X
15GB
X
20GB
X
30GB
X
40GB
Function
Press to play, press again to pause
Press once to select track
Press to stop
iPod MENU function
iPod SELECT function
iPod scroll up
iPod scroll down
9
D
X
X
X
X
X
X
X