32)
DAB/FM
INFO – Display station information
SCAN – Perform station search
MENU – Open/close menu
33)
REPEAT – Repeat function
34)
XBASS – Switch on/off bass amplification
35)
EQUALIZER – Select equaliser mode
36)
MEMORY – Programming function
37)
09 – Number buttons
38)
STANDBY – Switch on the device / switch to standby mode
8. Getting started
8.1. Inserting/replacing the battery in the remote
control
The remote control contains a CR2025 3V lithium battery.
When you use the remote control for the first time, pull out the transpar-
ent strip marked "Remove before use" without opening the battery com-
partment.
Replace the battery if the device fails to react to commands from the remote control
properly. Then follow these steps:
WARNING!
Risk of explosion!
Risk of explosion if battery is replaced incorrectly.
Replace batteries only with the same or equivalent
type.
Press the catch (1) and remove the battery holder complete with battery (2) from
the remote control. Dispose of the old battery in accordance with legal regula-
tions.
Place a new CR2025-type 3 V battery in the holder. Check the battery polarity is
correct.
Push the battery holder complete with battery back into the remote control as
far as it will go.
58