Assembly Instructions; Features; Control Panel - Battery Extender SP3 Manual Del Usuario

• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as
specified below:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
9.

ASSEMBLY INSTRUCTIONS

9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. FEATURES

1

11. CONTROL PANEL

DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See the Display
Messages section for a complete list of messages.
NOTE: During charging, the display will go into sleep mode and will not display any
messages. To turn the display back on, press the display button.
DISPLAY/ON BUTTON
The digital display will show the battery's voltage and percentage of charge.
Press the display button to show the charge progress.
25
18
3 4 5
2
7
6
50 100 150
18 16 14
1. AC Power cord
2. Digital display
3. Display/ON button
4. Charging/Charged/Maintaining
LED indicator
5. Hook attachment
6. Ring terminal quick-connect
7. 12V accessory plug quick-connect
8. Battery clamp quick-connect
8
• 8 •