Bi-Amping; Running-InYourPlatinumIiSpeakers - Monitor Audio Platinum II Serie Guía De Configuración Inicial

Bi-Amping

Bi-Amping is the same as Bi-Wiring except that you are introducing a second amplifier into the equation.
In order to Bi-Amp you must connect a set of speaker cables to the HF terminals on the loudspeaker from one amplifier
and another set of speaker cables to the LF terminals from the second amplifier.
NOTE: When wiring this method the terminal links MUST be removed.

Running-InYourPlatinumIISpeakers

Run your speakers in by playing normal music or by using our running-in CD: the System De-Tox Disk, at low-mid
listening levels for approximately 50-70 hours play time. You may find the sound will continue to improve even after
the 70 hour mark.
This can be done naturally over time: like a fine wine the performance will improve with age.
Alternatively if you wish to run the speakers continuously on loop you can decrease the audible volume/presence
by placing the speakers face-to-face so that the drivers/tweeters are directly aligned and as close as possible.
Then connect the amplifier to your speakers so that one is as normal (in phase): positive to positive and negative
to negative (red to red and black to black), and the other speaker out of phase: positive to negative and negative to
positive inputs on the speaker.
For information on Monitor Audio's System De-Tox disk please refer to our website: www.monitoraudio.com
6 Platinum Series II