If It Doesn't Work As Expected, P - SoundRacer V8 Manual De Instrucciones

4
4. Start the engine and rev it up to 2500-
3000rpm (revolutions per minute) by quickly
pressing down the throttle and then release it.
You should hear a short beep in the speakers
when the engine is slowing down. The beep
indicates that SoundRacer has found the
alternator signal. After about 3-5 seconds,
when the engine is down to the idling rpm,
you should hear two beeps indicating that
SoundRacer has detected the idling rpm.
That's it! Now you can press down on the
5.
throttle and hear a Super Sports Car engine
rev up.
6. To load the next sound on SoundRacer X just
press the SOUND button. The blue LED
starts flashing for about 12 second and the
new engine sound is heard.
Drive off and enjoy, but always drive safely!
2. If it does not works as expected
SoundRacer cannot detect the engine rpm?
If there is no first beep or second beeps or the sound
does not follow the engine rpm, then SoundRacer has
a problem detecting the alternator signal and rpm. This
can happen if the alternator signal is too weak. In that