switel BSW 120 Manual Del Usuario página 16

6 .
Add camera
2
.2
Tap the dots icon in the camera list of Internet view and
then tap the Add icon in the next page. Type in UID and
password information of the camera and then tap the Save
icon to finish the setup.
7
Reset the camera to factory defaults
While the camera is powered on for at least 1 minute, press the reset button
(using a small object or a pin) for at least 3 seconds, the power/status LED
will start blinking. The camera will be reset to factory default, which is
useful if you forget the password of the camera.
15