IKOS MONO Manual Del Usuario página 124

The max level of the Pellet tank is showed in the following image.
EN
Do not exceed the indicated limit under the risk of pellets falling inside the machine.
Lighting for the first time
During this stage there will appear some odours so it is appropriate to ventilate the room.
1. Make sure the tank is full of pellets and the machine is correctly plugged in;
2. Start by performing the pellet loading function described on page 112. After dropping some
pellets into the burner you can turn off this function by pressing any button and removing the
pellets from the burner. If the function finishes and no pellets have fallen, activate it again
until the pellets fall into the burner;
3. Check that the date and time are correct;
4. Set the desired temperature;
5. Press P1 for 3 seconds to start the ignition.
Max. Level Pellets
EN // 124
USER'S MANUAL