Bluefin SUP iSUP Manual De Instrucciones página 3

Please ensure the Air Pump is unplugged from the power source before you begin.
Connect the flexible conduit adaptor (10) to the inflation inlet (1) and twist
clockwise to tighten the connection (Figure
Figure 1.
Connect the air tap (8) to the inflation valve on your SUP. Firmly push the air tap
inwards and twist clockwise to secure the connection
Connect the power source to light up the LCD screen (2).
Select your desired unit of pressure, PSI or BAR, by pressing the pressure unit
toggle button (3) and selecting the unit that you require.
Press the pressurising button (4) or decompressing button (5) to set the desired
pressure value (up to a maximum of 16 PSI or 1.103 BAR).
Once you are happy, press the on / off button (6) to commence inflation. During
inflation, you can increase or reduce the pressure value by pressing either button
(4 or 5). You can also toggle the unit of pressure via the pressure unit toggle
button (3) or pause inflation using the on / off button (6).
1).
Figure 2.
(Figure 2).
Once your desired air pressure has been reached, the pump will automatically
stop inflating.
Following completion, please safely disconnect the power source.
Once the power source has been disconnected, please disconnect the air tap (8)
from the inflation valve on your SUP and store away your Air Pump in a dry and
ventilated place.