Introduction; Operating System Requirements; Networking Ability; Media Requirements - Rimage Producer 7100 Manual Del Usuario

Introduction

Introduction
This manual provides the information needed to operate the Producer 7100 and the Producer
8100 autoloaders. These products are part of the Rimage Producer III family of products. The
term 'Producer III' is used throughout this document to refer to the Producer 7100 or the Producer
8100.
To set up and install your
Producer III autoloader, refer
to the setup and installation
guide included with your
product.
The Producer III autoloader is
available with either the
Everest™ printer or the
PrismPlus™ printer
Producer 7100 Producer 8100

Operating system requirements

The Producer III runs on Windows 2000 Professional with SP4, Windows XP Professional with
SP2 or higher, and Windows Server 2003.

Networking ability

To submit orders from a networked PC, refer to the Rimage Advanced Setup Guide.

Media requirements

Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct media
requirements. Rimage Media Kits™ are designed for optimum recording and print performance.

Ribbon requirements

Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct printer
ribbons. Rimage media kits include the required print ribbons.

Label design requirements

Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for label design
requirements.
110867_A 1