Box Contents; Setting Up - RCA DTA809 Manual De Usuario

Box contents

The following items are included:
RCA Digital TV Converter Box
Quick Start User Manual
Guide (this booklet)

Setting up

Step 1: Installation
The Converter Box can be installed either horizontally or vertically. The left side of the Converter Box can be rotated as a
stand for vertical installation.
Vertical installation (recommended)
Step 2: Connections
Option 1: Basic connection to TV
(Optional)
From antenna
Tip:
U s i n g t h e o p t i o n a l A u d i o / V i d e o c a b l e
connection provides better picture quality in
case your TV set has Audio/Video input available.
4
RF coaxial cable
+
+
2 AAA Batteries
Bottom view
Horizontal installation
AC120V
60Hz
-
-
Co n n e c t yo u r e x i s t i n g a n te n n a c a b l e to t h e
1
ANTENNA IN jack of the Converter Box.
Connect the RF coaxial cable (supplied) from the
2
OUTPUT TO TV jack of the Converter Box to the
ANTENNA jack of the TV set.
Slide the CH3/CH4 selector on the back of the
3
Converter Box to the channel that is not in use in
your area. The Converter Box will send its video signal
to either Channel 3 or 4 on your TV.
Connect the Audio/Video cables (not supplied) from
4
the AUDIO / VIDEO output jacks (yellow, white, red)
of the Converter Box to the Audio/Video IN jacks on
the TV set. If there are more than two sets of Audio/
Video jacks on the TV set, connect only either INPUT1
or INPUT2 to those of your converter box.
Connect the AC power cable of the Converter Box to
5
a suitable wall outlet.
Note:
You may choose to connect the RF coaxial cable
to TV, or Audio/Video cables to TV, or both the
RF coaxial cable and AV cables to TV.
Remote control