Troubleshooting; Warranty - Dometic PowerPump PP127 Instrucciones De Montaje

Troubleshooting

9 Troubleshooting
Fault
The pump sputters.
The pump suction does
not work.
The motor will not start.
The pump does not switch
off.
10

Warranty

The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer's branch in your country (see the
back of the instruction manual for the addresses).
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
18
Possible cause
The water flow is
restricted.
The pump has run dry.
The pump supply pipe is
blocked.
The pipe system is leaking
and drawing in air.
The voltage supply has
been interrupted.
The fuse has blown.
The integrated switch is
defective.
The motor is defective.
The tank is empty.
The pressure monitor is
faulty.
PowerPump
Suggested remedy
Check whether the pipe
system is blocked.
Check whether the pipes
are too small.
Fill the water tank.
Clean the pump supply
pipe.
Clean the coarse filter.
Seal the pipe system.
Check the voltage supply.
Replace the fuse.
Contact your specialist
dealer.
Contact your specialist
dealer.
Fill the water tank.
Contact your specialist
dealer.
EN