Accessories; Technical Data - Hilti ST 1800-A22 Manual De Instrucciones

3 Accessories

Designation
Depth gauge
Depth gauge
Guard
Screwdriving accessories
Stand-up tool
Stand-up tool
Screw guide
Bits
Bit holder
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Battery
Battery

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Rated speed under no load
Max. torque
Chuck
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Short designation
ST‑DG 19
ST‑DG 22
ST‑DC
S‑NSD
SDT 25/15
SDT 30
ST‑SG 5.5/ ST‑SG 6.5
TX, PH, SL, PZ
S‑BH
C 4/36
C 4/36‑ACS
C 4/36-ACS TPS
C 4/36‑90
C 4/36‑350
B 22/3.3 Li‑Ion
B 22/2.6 Li‑Ion
B 22/1.6 Li‑Ion
ST 1800‑A22
21.6 V
2.5 kg
252 mm x 94 mm x 268 mm
2,000/min
12 Nm
Hex. socket ¹⁄₄"
Description
for screws with sealing washers up to
19 mm diameter
for screws with sealing washers up to
22 mm diameter
sockets for driving hex. screws (7, 8,
10, 12, ¼", ⁵⁄₁₆", ³⁄₈")
for collated screws
for collated screws
en
17