Soehnle HEATING PAD Instrucciones De Manejo página 17

GB
Important
This heat pillow is equipped with a safety mechanism, which
regulates the temperature by periodically switching the power on
and off. The temperature of the heating pillow corresponds to the
maximum permissible value of the applicable IEC regulation
regarding user safety. The device generates a mild heat that does
not have any harmful effects.
Place the heating pillow inside the cover. Ensure that the power
cord and temperature control are outside of the cover. Close the
zipper or hook-and-loop tape. Before switching the heat pillow
-
on. Then insert the power plug into the power outlet.
Use the temperature control to set the desired temperature. The
heat pillow starts automatically when the temperature is set on
the thermostat; the indicator light will light up. The heat pillow
shuts off and the indicator light goes out if the temperature
Attention
Please ensure that air circulates between the heat pillow and
your skin during use. Never use the heat pillow without a cover.
Automatic off
The electric heat pillow shuts off automatically after 90 minutes
of continuous use. This is to prevent that the pillow is in use wit-
hout being monitored. The indicator light will continue to be lit.
To switch the heat pillow on again, first set the temperature con-
After use please disconnect the power plug from the power out-
let.
17