Prior Adjustments - JANE MATRIX LIGHT 2 Manual Del Usuario

1 Prior adjustments

Adjusting the height of the shoulder straps
For maximum protection the shoulder straps of the MATRIX LIGHT sa-
fety seat should be adjusted to just above the baby's shoulders. Check
this height with the baby in the sitting or lying down position in the
safety seat.
The straps can be adjusted using a tightener so that the seat adjusts to
your baby during the whole stage of growth.
The MATRIX LIGHT safety seat has a quick shoulder strap height ad-
justment system, you just have to press a button and slide the ad-
justment mechanism along the backrest
1a
MATRIX LIGHT has 6 different heights for the shoulder straps.
There are two possible ways of changing the position:
1a.1 To change the position when lying down, pull the plastic flap
and slide the adjustment mechanism.
1a.2 To change the position when sitting down, press the button
on the backrest and slide it to the required position.
Release the button or flap and move the adjustment mechanism to
the nearest locking position, it should click into place. Check that it is
locked by pulling the adjustment mechanism.
Changing the position of the handle
1b
The carrying handle has 3 positions ( figure 1b ), each one of them
has a specific function:
Position 1: Hood folded. Does not have a lock.
Position 2: Carrying position. Position for installing the seat and
taking it off a JANÉ chassis and for carrying.
Position 3: AUTO position. For travelling in the car.
To change the position, press the buttons (2) and turn the handle
to the required position.
CAUTION Check and adjust the height and length of the
shoulder straps as the baby grows.
25