F Eatures Of Y Our; P Opcorn M Aker - Oster 151150 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

F
Y
eatures oF
our
A
G
F
assembly: Simply insert the Kettle into brackets and screw in
the popcorn kettle lever.
A. Light ON/OFF Switch
B. Popcorn ON/OFF Switch
C. Housing
D. Popcorn Kettle Lever
E. Popcorn Tray (removable)
P
M
oPcorn
aker
B
C
H
D
E
F. Popcorn Kettle with
stirring mechanism
G. Hanger
H. Kettle Hanging Brackets
4
H
t
ow
Before first use, clean the inside of the unit by wiping with a moist, non-
abrasive sponge, towel or cloth and then wipe with a non-abrasive dry
towel. Wipe down the inside of the Popcorn Kettle and be sure it is properly
placed in the brackets before starting.
1. First, find a flat surface near an electrical outlet before starting. Make
sure your cord is away from any water source. It is acceptable to use an
extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls
or bags for holding the popcorn, cooking oil, Kernel Measuring Cup
and Oil Measuring Spoon. (Kernel Measuring Cup and Oil Measuring
Spoon are included with your unit.)
2a. Place kettle (F) in hanging brackets (H)
2b. Assemble Popcorn Kettle lever (D) into Popcorn kettle (F) by using
counter clock-wise rotation.
3. Plug in the appliance while switch is flipped to OFF position.
4. Make sure Popcorn Kettle is properly secured in support brackets by
hooking the kettle onto the hanger of the unit.
5. Insert Internal Plug into the socket on the bottom of the Popcorn Kettle.
NOTE: Make sure the Popcorn Kettle is properly attached to brackets before
operating and that the motor plug is plugged into the Popcorn Kettle.
6. Turn appliance ON by flipping the switch on the top of the machine.
Allow the appliance to run 3–5 minutes to heat up Popcorn Kettle.
7. Turn unit OFF.
8. Use the Oil Measuring Spoon supplied with your POPCORN MAKER
to add 2 teaspoons of your favorite popcorn cooking oil to the Popcorn
Kettle. For best popping results, it is suggested to use light vegetable oil.
9. Add ¼ cup popcorn kernels to the Popcorn Kettle using supplied Kernel
Measuring Cup.
10. Turn the unit ON and close the door. The Popcorn Maker will begin
popping your popcorn. You will notice the popcorn will begin to spill
out the top of the kettle.
11. Once the kernels have stopped popping, tip the Popcorn Kettle using
the red knob on the Popcorn Kettle Lever to release the popcorn.
NOTE: DO NOT force Popcorn Kettle in or out of the brackets as this
may cause gears to become misaligned and appliance will not
operate properly.
o
o
Perate
5

Publicidad

Tabla de contenido
loading

Tabla de contenido