Led Display; System Menu - Ibiza Light FXBAR140 Manual De Instrucciones

LED DISPLAY

SYSTEM MENU

Press any key to enter the initial interface.
ADDR - DMX Address Setting
1. Press the either the MENU, UP, or DOWN buttons until "Addr" is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address. Press ENTER to set your desired DMX address.
CHND - DMX channel Mode
1. Press the MENU button until "Chnd" is displayed, press ENTER. "6CH", "8CH","12CH", "60CH" will be dis-
played
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and
exit.
SLND - Master-Slave Mode
1. Press the MENU button until "SLnd" is displayed, press ENTER. Select among Mast, SL1 and SL2 and press
ENTER.
SoUn - Sound controlled Mode
1. Press the MENU button until "SoUn" is displayed, press ENTER.
2. Su 0-59 or Se 00-99 will be displayed. Press the UP or DOWN buttons to find your desired show. Su 0-59
means sound controlled mode with programs from 0 to 59. Select a program and press ENTER. Se 00-99
means Sound sensitivity. 99 is the highest sensitivity.
AUTO - Auto Running effect
1. Press the MENU button until "Auto" is displayed, press ENTER.
2. The Display will show "Au 0" - "Au 59". Press the UP or DOWN buttons to find your desired show, and then
press Enter. SP 1-9 will be displayed. Set the auto running speed to a value between 1 and 9 and press
ENTER.
COLO - Color selection
1. Press the MENU button until "Colo" is displayed, press ENTER.
2. Co 1-15 will be displayed. Select a color between 1 and 15 via the UP & DOWN buttons and press ENTER.
MANU - Manual mode
1. Press the MENU button until "Manu" is displayed, press ENTER.
2. Select a color among Red 0-255/Green 0-255/Blue 0-255/Whit 0-255 and press ENTER.
DISP - Display reverse by 180°
1. Press the MENU button until "dISP" is displayed, press ENTER.
2. Press the UP button to select "dSIP" to reverse the display, or "dISP" to change the display back.
3. Press ENTER to confirm.
Ver - Displays the device version
DMX CHANNEL CHART PLEASE REFER TO THE END OF THE MANUAL
CARE
Before cleaning the unit, disconnect it if from the mains. Do not use aggressive cleaning agents. Use a clean
cloth to wipe any dust or dirt from the product. We are not liable for damage arising from incorrect handing,
improper use or wear and tear. We reserve the right to make technical modifications.
4
MANUAL - FXBAR140
The LED display has 4 buttons: MENU / UP / DOWN / ENTER
©Copyright LOTRONIC 2019