Cleaning And Storage - HQ-Power PSSMV19 Manual Del Usuario

5. Use
• Make sure that the electronic device for which the
adapter will be used is technically compliant and
compatible with this adapter.
• Verify with the inscription on the device or original AC
adapter whether the required DC voltage is 15~24V.
• Switch on the AC power by plugging the power cable
into the mains. The LED display shows a value
between 15.0V and 15.5V.
• Choose the plug that matches your electronic device
and connect it to the joint of the adapter. The keying
on the connector prevents from connecting the plug
the wrong way. Do not force. The plug determines the
polarity.
• The LED display will indicate the output voltage.
• Connect the plug to the electronic device. Do not
force.
6. Caution
• For use on an earthed 100~240VAC 50/60Hz mains
only!
• Always double check voltage and polarity before
using a device in order to avoid damage.
• Do not short circuit the connectors.
• Do not use this adapter with an appliance that
requires more than 90W.
• Do not attempt to open or repair this device as it
will void the warranty.
• Connect the power cord to the adapter before
plugging it into the power outlet.
• Do not leave connected to mains when not in use.

7. Cleaning and storage

• Disconnect the adapter from the mains and wipe it
with a moist, lint-free cloth. Do not use alcohol or
solvents.
• Do not submerge the adapter in water or any
other liquid.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
Use this device with original accessories only.
Velleman nv cannot be held responsible in the
event of damage or injury resulted from
(incorrect) use of this device.
For more info concerning this product, please visit
our website www.hqpower.com.
The information in this manual is subject to
change without prior notice.
00 (03/07/2008)
PSSMV19
4