Irc-6 (Infrared Remote Control 6) Operation - Chauvet DJ Swarm 4 FX Manual De Usuario

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRC-6 directly at the receiver on the product.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
Page 24 of 80
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
·
Press and hold <AUTO> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> Aut0
o
<1> Aut1
o
<2> Aut2
o
<3> Aut3
o
<4> Aut4
o
·
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press and hold <SOUND> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> Sou0
o
<1> Sou1
o
<2> Sou2
o
<3> Sou3
o
<4> Sou4
o
Strobe Modes
To adjust the strobe program and rate:
·
Press <STROBE> on the IRC-6.
·
Press <0> to strobe all, or any number between <1> and <9> to choose your auto program.
·
Press <+> or <–> to increase or decrease, respectively, the strobe rate.
·
Press <STROBE> again to turn off the strobe.
Moonflower Color Modes
To set a specific color output for the moonflower effects:
·
Press <R> for red.
·
Press <G> for green.
·
Press <B> for blue.
·
Press <A> for amber.
·
Press <UV> for purple.
·
Press <W> for white.
Miscellaneous Operation
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
again.
<5> Aut5
o
<6> Aut6
o
<7> Aut7
o
<8> Aut8
o
<9> Aut9
o
<5> Sou5
o
<6> Sou6
o
<7> Sou7
o
<8> Sou8
o
<9> Sou9
o
Swarm™ 4 FX User Manual Rev. 1