Cleaning - Hitachi RP 350YDH Instrucciones De Manejo

000Book_RP350YDH.book 10 ページ ２０１７年８月２４日 木曜日 午後３時５１分
ENGLISH
ENG
If you are then going to dry vacuum, insert a dry
filter. If there is frequent switching between dry and
wet vacuuming, we recommend the use of a second
(replacement) filter. Allow the filter, container and
accessories to dry: otherwise dust may adhere to
damp components.
7.3 Permanent filter cleaning
The vacuum cleaner is fitted with an
electromagnetic filter cleaning unit
which can be used to shake the dust
off the folding filter cassettes. The
folding filter cassettes are cleaned
alternately so that continuous
working can be guaranteed.
- Continuous monitoring of the filter filling level
through differential pressure measurement, for an
absolutely precise on-demand filter cleaning
during the operation
- Thereby constant high air flow cleaning
guaranteed during the operation, even for critical
types of dust
10
7.4 Transport
In the case of the RP350YDH, leave the hose on the
appliance to prevent dust accidentally escaping.
Wrap the suction hose about the vacuum cleaner.
Place the accessories in a suitable plastic bag and
seal the bag.
Suspend the mains connection lead on the cable
holder (11).
The upper part (8) must be securely sealed to the
container (10) - check that the snap locks (9) are
closed.
8

Cleaning

8.1 General Cleaning Instructions
Clean the container and accessories with water.
Wipe the upper part (8) with a damp cloth.
Caution! This appliance contains dust that is
harmful to health. Discharge and maintenance
operations (including disposal of the dust collection
containers) must only be carried out by qualified
specialists wearing appropriate protective clothing
and equipment.
Emptying the Container
- Unplug.
- Open the snap locks (9). Remove the upper part
(8) from the container (10).
- Tip out the container.
Dispose of the paper filter bag/fleece filter bag.
- Unplug.
- Pull on mask.
- Open the snap locks (9). Remove the upper part
(8) from the container (10).
- Carefully pull back and remove the paper filter bag
(17)/fleece filter bag (18) from the suction opening
(12). Seal the flange of the paper filter bag/fleece
filter bag by folding over the cover.
- Dispose of the vacuumed material in accordance
with legal regulations.
Disposing of the PE Filter Bag
- Insert mains plug.
- Switch on the vacuum cleaner and vibrate the
filters: turn the switch (2) to the "IR" position.
- Switch off the vacuum cleaner: turn the switch (2)
to the "0" position.
- Pull on mask.
- Open the snap locks (9). Remove the upper part
(8) from the container (10). Before setting down
the upper part, turn switch (2) to the "I" position so
that any falling dust is vacuumed.
- Carefully pull back the PE filter bag (5) from the
suction opening (12). Seal the flange of the PE
filter bag by folding over the cover.
- Dispose of the vacuumed material in accordance
with legal regulations.