ENGLISH
PARTS NAME:
A. Fine tuning Switch
B. SwitchⅠ
D. Motor unit
E. ejection button
G. Chopping bowl lid
H. Small"S"blade
J. Whisk holder
K. Whisk
Caution
Please read the instructions carefully and completely before using the
appliance.
1. Before plugging into a socket, check whether your voltage
corresponds to the rating label of the appliance.
2. The appliance is not to be used by children or persons with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
children being supervised not to play with the appliance.
3. Always disconnect the blender from the supply if it is left
unattended and before assembling, disassembling or cleaning;
4. Don't let children play with this appliance. Do not allow children to
use the blender without supervision
5. Switch off the appliance and disconnect from supply before
changing accessories or approaching parts that move in use.
6. Care shall be taken when handling the sharp cutting blades,
emptying the bowl and during cleaning.
7. Don't plug the appliance into the power supply until it is fully
8. Don't let the motor unit, cord, or plug get wet.
9. Never use a damaged appliance. If it has been damaged, please
10. If the supply cord is damaged, it must be replaced by approved
11. Don't let excess cord hang over the edge of the table or worktop or
12. The blades are very sharp!
13. Don't place the appliance in the hot ingredients.
14. The appliance is constructed to process normal household
15. Neither the measuring beaker, nor the chopping bowl is microwave
C. SwitchⅡ
16. Short-time operating. Use the appliance according to the table of
F. Blender stick
I. Chopping bowl
14. If you want to operate the unit for more than one cycle, you should
L. Measuring
beaker
15. Do not use the masher to process uncooked food.
M. Masher
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1. Take the blender stick on the motor unit until it locks.
assembled and always unplug before disassembling the appliance
or handle the blade.
get it to approved service center, checked or repaired.
service center.
touch hot surface.
quantities.
proof.
Processing Guide.
wait at least 3 minutes before the next working.