General Instructions - JANE Transporter 2 Manual De Instrucciones

GENERAL INSTRUCTIONS

In order to protect your baby adequately and to ensure
their comfort and stability in the car, the following ins-
tructions must be strictly followed:
Your TRANSPORTER safety carry cot should be installed on the
rear seat of the car. It is advisable to install it with the head part
always in the centre of the seat, never next to the door.
It is only suitable for cars fitted with three anchoring point au-
tomatic belts, approved according to Regulation ECE-16 or other
equivalent rules. DO NOT use with a two anchoring point belt.
Not all safety systems are exactly the same, so we advise that you
check your TRANSPORTER in the car in which it is going to be fit-
ted.
It is very important not to use second-hand products, as JANÉ can
only guarantee complete safety with items used by their first bu-
yer.
JANÉ recommends that you replace your TRANSPORTER safety
seat with a new one if it has been subjected to violent stresses
in an accident.
Check that all the straps are in the correct position and duly adjus-
ted to your TRANSPORTER. Make sure that none of the straps are
twisted. The child must understand that he must not play with the
straps or fasteners under any circumstances.
21