Programming Of M-Bus Address (Optional); Radio (Optional); General Information - Zenner Zelsius C5-ISF Manual De Montaje E Instrucciones

Deutsch English
Programming of M-Bus address
(optional)
■
Select of the display „Adr0 000"
in level 3 (same for the additional
inputs „Adr1" to „Adr3").
■
Press the button for about 2 se-
conds (until the door symbol re-
appears) and then release. The
right digit starts flashing. With
one short push the value of the
digit is incremented.
■
With each long press, the se-
lected value will take over and
change to next digit (as soon as
desired character blink, release
the button). The new value is now
programmed.
■
If the desired value is reached
you have to press the button un-
til the number stops flashing and
the return to the menu is comple-
ted.
■
The programming process can
be repeated if necessary.
Note: If the editor is not terminated,
maybe changed values are being
saved when automatically return to
the main display.
28
Français

Radio (optional)

General information

zelsius
an integrated radio interface are
marked for better visibility on the up-
per cover with the following symbol:
The radio interface is always deac-
tivated on delivery. To activate the
device, no software is required. Only
the activated sleep mode has to be
finished: Devices that are in sleep
mode (Display: SLEEP 1) must be
activated by at least five second
press of the button until the energy
display appears. The radio energy
meters are equipped with an inter-
nal antenna.
-energy meters which have
®