Makita DMR202 Manual De Instrucciones página 8

Pairing and playing your Bluetooth
device for the first time
1. Press the Power button
the 'BT PAIR' will appear on the display to show the
speaker is discoverable.
2. Activate Bluetooth on your device according to the
device's user manual to link to the speaker. Locate
the Bluetooth device list and select the device named
'DMR202' with some mobiles (which are equipped with
earlier versions than BT2.1 Bluetooth device), you may
need to input the pass code "0000".
3. Once connected, there will be a beep sound and the
display will show 'BT CONNECT'. You can simply
select and play any music from your source device.
Volume control can be adjusted from your source
device, or directly from the speaker.
4. Use the controls on your Bluetooth-enabled device or
on the speaker to play/pause and navigate tracks.
Note:
1. If 2 Bluetooth devices, pairing for the first time, both
search for the speaker, it will show its availability on
both devices. However, if one device links with this unit
first, then the other Bluetooth device won't find it on the
list.
2. If your Bluetooth device is temporarily disconnected to
the speaker, then you need to manually reconnect your
device again to the speaker.
3. If 'DMR202' shows in your Bluetooth device list but
your device cannot connect with it, please delete the
item from your list and pair the device with the speaker
again following the steps described previously.
4. The effective operation range between the system and
the paired device is approximately 10 meters (30 feet).
Any obstacle between the system and the device can
reduce the operational range.
5. Bluetooth connectivity performance may vary
depending on the connected Bluetooth devices. Please
refer to the Bluetooth capabilities of your device before
connecting to the speaker. All features may not be
supported on some paired Bluetooth devices.
Playing audio files in Bluetooth mode
When you have successfully connected the speaker with
the chosen Bluetooth device, you can start to play your
music using the controls on your connected Bluetooth
device.
1. Once playing has started adjust the volume to the
required setting using the Volume buttons
speaker or on your enabled Bluetooth device.
2. When you press the Volume up/down button, the
volume indicator will flash in fast flashing red. If the
indicator light in solid red, it indicates the volume is in
maximum volume or minimum volume.
3. Use the controls on your device to play/pause and
navigate tracks. Alternatively, control the playback
using Play/Pause
buttons on the speaker.
4. Press and hold the Next track
to fast-forward/Rewind the current track. Release
the button when the desired point in the track is
reached.
to turn on the speaker and
, Next track , Previous track
or Previous button
Note:
1. That not all player applications or devices may respond
to all of these controls.
2. Some mobile phones may temporarily disconnect from
the speaker when you make or receive calls. Some
devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or
for other reasons unrelated to audio streaming. Such
behaviour is a function of the connected device and
does not indicate a fault with the speaker.
3. The display does not show information such as title,
artist, album, etc., when playing in Bluetooth mode.
4. The play mode function (Repeat/Random) cannot be
used in Bluetooth mode.
Speaker memory and reconnecting
a device
The speaker can memorize up to 8 sets of paired device,
when the memory exceed this amount, the oldest pairing
history will be over written. If your Bluetooth device
already paired with the speaker previously, the unit
will memorize your Bluetooth device and it attempts
to reconnect with a device in memory which is last
connected. If the last connected device is not available,
the speaker will be discoverable.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button
seconds to disconnect with your Bluetooth device. The
Bluetooth indicator flashes in blue indicating the speaker
is discoverable again for pairing.
Playing music via auxiliary input socket
A 3.5mm Auxiliary input socket is provided on the right
side of the unit to permit an audio signal to be fed into the
unit from any devices that features a headphone or audio
output, such as an iPod, MP3 or CD player.
1. Connect a stereo or mono audio source (for example,
iPod, MP3 or CD player) to the Auxiliary input socket
(marked 'AUX') and the Aux in indicator turns green
indicating the speaker is in auxiliary input mode.
2. Adjust the Volume control on your iPod, MP3 or CD
player to ensure an adequate signal and then adjust
the volume on the speaker for comfortable listening.
3. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on
on the
your audio device and then adjust the volume on the
speaker as required.
Note:
1. When Aux in socket is connected an audio device, the
speaker will be switched from Bluetooth to
input mode. You can also press the source button to
select your desired mode.
2. The display does not show information such as title,
artist, album, etc., when playing via auxiliary input
socket.
3. The playback or play mode cannot be controlled with
the buttons on the speaker, when playing via auxiliary
input socket.
7 ENGLISH
for 2-3
auxiliary