Technical Data - Hilti AG 125-A22 Manual De Instrucciones

Item Equipment
E DC‑EX 125/5"-C com-
pact guard (in combin-
ation with A)
F Side handle
G DC BG 125
hoop-handle (optional
for F)
H Clamping nut
I Clamping flange
K Kwick-Lock (optional
for H)

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage
Rated speed
Max. washer diameter
Dimensions (L x H x W) without hood
Weight in accordance with EPTA procedure 01/2003
Battery
Rated voltage
Capacity
Energy capacity
Weight
Type of cell
No. of cells
Deep discharge protection
Information about the power tool and applications
Drive spindle thread (arbor size)
Spindle length
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
AC‑D AG-D
- -
X X
X X
X X
X X
X X
AG 125‑A22
21.6 V
9,500/min
Ø 125 mm
351 mm x 131 mm x 93 mm
2.7 kg
B 22/2.6 Li‑Ion
21.6 V
2.6 Ah
56.16 Wh
0.78 kg
Li-ion
12
Yes
M 14
22 mm
AF-D AN-D
- -
X X
X X
X X
X X
X X
B 22/3.3 Li‑Ion
21.6 V
3.3 Ah
71.28 Wh
0.78 kg
Li-ion
12
Yes
DG‑CW DC‑D
-
X
X X
X X
X X
X X
-
X
21
en