Revolving Spit; Pause Operation; End Operation; Cleaning / Maintenance - Profi Cook PC-MBG 1186 Manual De Instrucciones

10.
NOTE:
• Use the button to switch the cooking chamber
lighting on and off.
• If you would like to additionally switch on the recir-
culating air, press the
up in the display.
11. Use the button to start the program. The
up in the display.
NOTE:
The countdown starts as soon as the set temperature
has been reached. You will hear multiple beeps.

Revolving Spit

NOTE:
Do not select a roast which is too large. The food being
grilled must be far enough away from the internal walls
and the heating elements and must not touch them.
1. Insert the baking tray / drip pan into the bottom guide
ridge of the oven.
2. Rub edible oil on to the revolving spit and spit forks.
3. Poultry has to be dressed before grilling. To do so, tie
the wings and the legs closely to the body using kitchen
yarn.
4. Place the dressed poultry or the piece of roast meat
carefully on to the revolving spit. Push the spit forks on
to the revolving spit and use them to fix the roast meat in
place. Tighten the fixing clips by means of the screws.
WARNING:
• Always pull the plug before cleaning and maintenance.
• Wait until the appliance has cooled down.
• Never immerse the appliance in water. It could result in an elec-
tric shock or fire.
50
PC-MBG1186_IM
button. The icon lights
icon lights

Cleaning / Maintenance

5. Place the prepared revolving
spit in the oven with the help of
the removal tool. Put the end
of the revolving spit without
the notch into the motor on
the right side of the oven first.
Then hook the other end of
the revolving spit into the hanger on the left hand side
of the oven.
6. Select the program "Chicken". Use the
the program.
The revolving spit begins to turn. Please ensure that the
piece of roast meat can turn freely.
7. Once the set time has elapsed, you will hear multiple
beeps. When the meat is cooked remove the revolving
spit using the handle.

Pause Operation

Press the button to pause the operation. The icon
lights up in the display. Press the
the operation. The icon lights up in the display.
NOTE:
• The appliance will start from the spot it has been
paused.
• If you pull the plug or press the
settings get lost.

End Operation

1. Once the time has elapsed, you will hear multiple beeps.
After around 60 seconds the appliance will automatically
switch to standby mode. You may also press the
button to prematurely switch the appliance into
the standby mode.
2. Disconnect the mains plug from the socket.
3. Allow the appliance to cool before cleaning!
button to start
button again to resume
button, your current
01.08.19